Skip to main content

Architectural door hardware manufactured in Aligarh for more than 25 years.

Bhagwati SalesCoorporation

Manufacturing

Twenty-five years of learning, on one factory floor.

Aligarh has made builder and door hardware for generations, and the knowledge that matters most in this trade is not written down — it is in how a finish is judged by eye, how a batch is corrected mid-run, and how a problem on site is traced back to a production decision.
Request a Factory VisitQuality Assurance

To confirmAll factory photography is pending. Stock imagery will not be used — every photograph on this page must be of the company’s own facility and processes.

Production Sequence

How an order becomes a product.

The same nine stages apply whether the order is fifty sets for a sample flat or a container for a distributor.
  1. 01

    Product Requirement

    We start with the product, quantity, finish and application. For projects this usually means a door schedule or BOQ; for distributors and importers, an assortment and packing plan.

  2. 02

    Design & Specification

    Dimensions, sections, fixings and tolerances are fixed against the door and lock the product will work with. Drawings are shared for approval where the item is customised.

  3. 03

    Raw Material SelectionTo confirm

    Base metal is selected for the product and finish — brass, stainless steel, zinc alloy, aluminium or steel — and checked on receipt before it enters production.

  4. 04

    ManufacturingTo confirm

    Components are produced through the processes appropriate to the item, including casting, forging and machining operations.

  5. 05

    Surface FinishingTo confirm

    Polishing, buffing, plating and coating are carried out to the approved finish reference, which is the stage that most affects how consistent a project looks.

  6. 06

    Assembly

    Handles, roses, plates, spindles and fixings are brought together as complete sets, so what arrives on site is ready to fit.

  7. 07

    Quality Inspection

    Material, dimensions, finish, assembly and function are checked against the approved sample before an order is released for packing.

  8. 08

    Packaging

    Products are poly-bagged with fixings, packed into inner boxes and master cartons, and labelled to the buyer's requirement including private-label packing.

  9. 09

    Dispatch

    Orders are dispatched against the agreed schedule — phased for construction sites, consolidated for distributors, and export-packed for shipment.

Our Facility

What the factory does.

Where a figure has not been confirmed by the company, this page says so rather than filling the gap with an estimate.

Factory OverviewTo confirm

Our manufacturing base is in Aligarh, Uttar Pradesh — one of India's recognised centres for door and builder hardware. [Facility size, unit count and layout to be confirmed by the company.]

Production ProcessesTo confirm

Processes carried out in-house are confirmed per product and may include casting, machining, drilling, polishing, buffing, plating, coating, assembly, inspection and packing. [Final list to be confirmed.]

MachineryTo confirm

Machine list and capability to be provided by the company. We do not publish machine names or counts that have not been verified.

WorkforceTo confirm

Team size and the split between production, finishing, assembly and inspection to be confirmed by the company.

Materials

Brass, stainless steel, zinc alloy, aluminium and steel are used across the range, selected per product and finish.

Finishing

Polishing, buffing, plating and coating are carried out against an approved physical finish sample retained as the production reference.

Assembly

Sets are assembled complete with roses, escutcheons, spindles and fixings so site fitting does not depend on loose components arriving separately.

Production Planning

Orders are planned against delivery schedules — phased for construction sites, consolidated for distributors, and timed to shipment dates for exports.

CapacityTo confirm

Monthly capacity figures to be provided by the company. We publish capacity only once it can be stated accurately.

Custom Development

New products are developed from drawings, samples or reference products, with feasibility confirmed before any commitment is made.

Materials

The metal decides most of what follows.

Material selection drives the finish range, the production route, the weight in the hand and the cost. We choose it against the product and the application, not the other way round.

Brass

Cast and machined brass, suitable for solid architectural hardware and a wide finish range.

Typically used for: Lever handles, knobs, mortise sets, traditional fittings

Stainless Steel

Used where a cooler tone and satin or mirror finish is specified.

Typically used for: Pull handles, lever handles, commercial applications

Zinc Alloy

Pressure die-cast, suited to detailed forms and coated finishes at project volumes.

Typically used for: Lever handles, knobs, roses, escutcheons

Aluminium

Lighter sections for large pulls and accessories where weight matters.

Typically used for: Pull handles, brackets, accessories

Mild Steel

Coated steel for bolts, brackets and functional fittings.

Typically used for: Tower bolts, brackets, stoppers

Factory Visit

The best way to judge a manufacturer is to walk the floor.

We welcome buyers, procurement teams and sourcing agents at the factory. Visits are arranged by appointment so the right people are available and you see production actually running.
  • See the processes carried out in-house
  • Review finish samples against your reference
  • Discuss capacity and production planning directly
  • Meet the team who will handle your orders
Request a Factory Visit

Want to understand our production capability?

Send your requirement and we will tell you how it would be produced, what stages it passes through and what the realistic timeline looks like.

Request a QuoteRequest SamplesWhatsApp Us
Request a QuoteWhatsApp