A floor-mounted stopper with a cushioned contact face, for stone and tile floors.
- Material
- Brass, Stainless Steel, Zinc Alloy
- Finishes
- Satin Stainless SteelMatte BlackAntique BrassSatin BrassChrome
DrawingProduct photography pending — technical elevation shown
Door Stoppers
Cushion Magnetic Door Catch
SKU BSC-DS-504
A magnetic catch that stops the door and holds it open.
- Materials
- Stainless Steel, Brass, Zinc Alloy
- Finishes
- 4 options
- Door types
- Internal Door, Main Door
- Availability
- CustomisableOEM / private label
Prices are not published because they depend on material, finish, quantity, packaging, customisation and delivery terms. Send your requirement for a specific quotation.
Overview
About this product
The Cushion combines a stopper with a magnetic catch, so the door is both stopped and held open. It is specified in hotels and offices where doors are routinely held open during the day.
Holding force is confirmed against the door weight before it is specified for a project.
Specification
| Type | Magnetic catch stopper |
|---|---|
| Mounting | Floor or wall, with door-mounted keeper |
| Height | 42 mm |
| Holding force | Confirmed against door weight at specificationTo confirm |
| Fixing | Concealed screw fixing |
| Set contents | Catch body and door keeper |
To confirmSpecifications shown are indicative. Exact dimensions, options and packing are confirmed against your requirement at the time of quotation.
Commercial terms
| Minimum order quantity | Available on request |
|---|---|
| Production lead time | Based on order quantity, finish and packing |
| Packaging | Individually poly-bagged with fixings, packed in printed inner boxes and export-grade master cartons. Buyer-specific inner boxes, labelling and barcodes can be produced. |
Warranty & compliance
Warranty terms are confirmed in writing at the time of order and vary by product, material, finish and application.
Testing and compliance documents are provided according to product type and buyer requirements. We do not display certification marks that have not been obtained — tell us what your market requires and we will confirm what can be arranged.
What is included
- Catch body
- Door keeper
- Fixing set
Customisation options
- Holding force selected for the door weight
- Floor or wall mounting from the same range
- Keeper profile matched to the door edge
- Finish matched to the door hardware
Recommended applications
Technical documentation
Dimensioned drawings and a per-product data sheet are prepared against your specification and sent with the quotation.
Related Products
Specified alongside this product
Items that are usually quoted together, so a door schedule arrives complete and finish-matched.
A heavier floor stopper for main doors and high-traffic openings.
- Material
- Brass, Stainless Steel, Mild Steel
- Finishes
- Satin Stainless SteelMatte BlackAntique BrassChrome
A wall-mounted stopper for openings where a floor fixing is not possible.
- Material
- Brass, Stainless Steel, Zinc Alloy
- Finishes
- Satin Stainless SteelMatte BlackAntique BrassSatin NickelChrome
Accessories
Finish the door schedule
The last ten percent of a schedule is usually accessories — and it is where projects most often run short.
A wide-angle door viewer finished to match the entrance hardware.
- Material
- Brass, Zinc Alloy
- Finishes
- Antique BrassSatin Stainless SteelMatte BlackSatin BrassChrome
A door safety chain for apartment entrance doors.
- Material
- Brass, Zinc Alloy, Stainless Steel
- Finishes
- Antique BrassSatin Stainless SteelMatte BlackChromeSatin Brass
Door numerals and letters, finish-matched across a whole tower.
- Material
- Brass, Stainless Steel, Zinc Alloy
- Finishes
- Antique BrassSatin Stainless SteelMatte BlackSatin BrassPolished Brass
Product Questions
Frequently Asked Questions
In most cases yes. Send a physical sample of the finish you need to match. We produce a finish sample for your approval, and the approved sample becomes the production reference for the whole order.
Yes, subject to a feasibility review. Share the drawing or a physical sample and we will confirm what is producible, what needs adjustment, and whether any tooling is required before you commit.
MOQ depends on the product, material, finish and whether the item is standard or customised. It is confirmed with your quotation rather than applied as one blanket figure.
Yes. Samples are an ordinary part of the process, particularly for finish approval. Request samples through the enquiry form or the sample request on any product page.
Request Cushion Magnetic Door Catch for your project or programme
Tell us the quantity, finish and delivery schedule. We will confirm the specification, arrange samples for approval and quote against your requirement.