A short pull for wardrobes, joinery and cabinet fronts, finish-matched to the door range.
- Material
- Brass, Stainless Steel, Zinc Alloy, Aluminium
- Finishes
- Matte BlackAntique BrassSatin BrassSatin Stainless SteelRose Gold+1
DrawingProduct photography pending — technical elevation shown
Brackets
Ledger Rail Bracket
SKU BSC-BR-705
A wall bracket for hanging rails in wardrobes and retail display.
- Materials
- Stainless Steel, Brass, Mild Steel
- Finishes
- 4 options
- Door types
- Wardrobe & Joinery
- Availability
- CustomisableOEM / private label
Prices are not published because they depend on material, finish, quantity, packaging, customisation and delivery terms. Send your requirement for a specific quotation.
Overview
About this product
The Ledger supports round and oval hanging rails in wardrobes and retail fit-outs. It is supplied to match the rail diameter used on the project.
It is finish-matched to the wardrobe pulls and knobs supplied with the same package.
Specification
| Type | Hanging-rail support bracket |
|---|---|
| Rail sizes | 19 / 25 / 32 mm round; oval on request |
| Mounting | End-fix and centre-support types |
| Fixing holes | Two per plate |
| Load guidance | Confirmed against span and rail sectionTo confirm |
To confirmSpecifications shown are indicative. Exact dimensions, options and packing are confirmed against your requirement at the time of quotation.
Commercial terms
| Minimum order quantity | Available on request |
|---|---|
| Production lead time | Based on order quantity, finish and packing |
| Packaging | Individually poly-bagged with fixings, packed in printed inner boxes and export-grade master cartons. Buyer-specific inner boxes, labelling and barcodes can be produced. |
Warranty & compliance
Warranty terms are confirmed in writing at the time of order and vary by product, material, finish and application.
Testing and compliance documents are provided according to product type and buyer requirements. We do not display certification marks that have not been obtained — tell us what your market requires and we will confirm what can be arranged.
What is included
- Bracket
- Fixing screws
Customisation options
- Rail diameter and profile matched
- Centre supports for long spans
- Finish matched to wardrobe hardware
- Complete rail and bracket sets supplied together
Recommended applications
Technical documentation
Dimensioned drawings and a per-product data sheet are prepared against your specification and sent with the quotation.
Related Products
Specified alongside this product
Items that are usually quoted together, so a door schedule arrives complete and finish-matched.
A clean-lined shelf bracket finished to match the door hardware package.
- Material
- Mild Steel, Stainless Steel, Brass
- Finishes
- Matte BlackAntique BrassSatin Stainless SteelSatin Brass
A small domed knob for wardrobes, drawers and joinery, finish-matched to door hardware.
- Material
- Brass, Zinc Alloy, Stainless Steel
- Finishes
- Matte BlackAntique BrassSatin BrassSatin NickelRose Gold+1
Accessories
Finish the door schedule
The last ten percent of a schedule is usually accessories — and it is where projects most often run short.
A wide-angle door viewer finished to match the entrance hardware.
- Material
- Brass, Zinc Alloy
- Finishes
- Antique BrassSatin Stainless SteelMatte BlackSatin BrassChrome
A door safety chain for apartment entrance doors.
- Material
- Brass, Zinc Alloy, Stainless Steel
- Finishes
- Antique BrassSatin Stainless SteelMatte BlackChromeSatin Brass
Door numerals and letters, finish-matched across a whole tower.
- Material
- Brass, Stainless Steel, Zinc Alloy
- Finishes
- Antique BrassSatin Stainless SteelMatte BlackSatin BrassPolished Brass
Product Questions
Frequently Asked Questions
In most cases yes. Send a physical sample of the finish you need to match. We produce a finish sample for your approval, and the approved sample becomes the production reference for the whole order.
Yes, subject to a feasibility review. Share the drawing or a physical sample and we will confirm what is producible, what needs adjustment, and whether any tooling is required before you commit.
MOQ depends on the product, material, finish and whether the item is standard or customised. It is confirmed with your quotation rather than applied as one blanket figure.
Yes. Samples are an ordinary part of the process, particularly for finish approval. Request samples through the enquiry form or the sample request on any product page.
Request Ledger Rail Bracket for your project or programme
Tell us the quantity, finish and delivery schedule. We will confirm the specification, arrange samples for approval and quote against your requirement.