A traditional tower bolt in the sizes most commonly called for on Indian sites.
- Material
- Brass, Stainless Steel, Mild Steel
- Finishes
- Antique BrassSatin Stainless SteelMatte BlackSatin BrassChrome
DrawingProduct photography pending — technical elevation shown
Tower Bolts & Kundi
Stile Flush Bolt
SKU BSC-TB-604
A flush-mounted bolt for the inactive leaf of a double door.
- Materials
- Brass, Stainless Steel
- Finishes
- 4 options
- Door types
- Main Door, Internal Door
- Availability
- CustomisableOEM / private label
Prices are not published because they depend on material, finish, quantity, packaging, customisation and delivery terms. Send your requirement for a specific quotation.
Overview
About this product
The Stile is a flush bolt let into the door edge, used on the inactive leaf of a double door where a surface bolt would be visible.
It requires a routed housing, so we confirm the door construction with the door manufacturer before supply.
Specification
| Type | Flush bolt, mortised into door edge |
|---|---|
| Faceplate | 150 / 200 / 250 mm |
| Faceplate width | 19 mm |
| Throw | 16 mm |
| Fixing | Recessed, with matching screws |
| Housing | Routed housing required in the door |
To confirmSpecifications shown are indicative. Exact dimensions, options and packing are confirmed against your requirement at the time of quotation.
Commercial terms
| Minimum order quantity | Available on request |
|---|---|
| Production lead time | Based on order quantity, finish and packing |
| Packaging | Individually poly-bagged with fixings, packed in printed inner boxes and export-grade master cartons. Buyer-specific inner boxes, labelling and barcodes can be produced. |
Warranty & compliance
Warranty terms are confirmed in writing at the time of order and vary by product, material, finish and application.
Testing and compliance documents are provided according to product type and buyer requirements. We do not display certification marks that have not been obtained — tell us what your market requires and we will confirm what can be arranged.
What is included
- Flush bolt
- Keeper or floor socket
- Fixing screws
Customisation options
- Faceplate length and width to drawing
- Top and bottom sets supplied together
- Floor socket type selected for the floor finish
- Bulk supply to door manufacturers
Recommended applications
Technical documentation
Dimensioned drawings and a per-product data sheet are prepared against your specification and sent with the quotation.
Related Products
Specified alongside this product
Items that are usually quoted together, so a door schedule arrives complete and finish-matched.
A compact surface bolt for internal, bathroom and wardrobe doors.
- Material
- Brass, Stainless Steel, Zinc Alloy
- Finishes
- Satin Stainless SteelAntique BrassMatte BlackChromeSatin Brass
A rose-mounted set for door manufacturers standardising on concealed fixings.
- Material
- Zinc Alloy, Brass, Stainless Steel
- Finishes
- Matte BlackSatin Stainless SteelSatin NickelAntique BrassChrome
Accessories
Finish the door schedule
The last ten percent of a schedule is usually accessories — and it is where projects most often run short.
A wide-angle door viewer finished to match the entrance hardware.
- Material
- Brass, Zinc Alloy
- Finishes
- Antique BrassSatin Stainless SteelMatte BlackSatin BrassChrome
A door safety chain for apartment entrance doors.
- Material
- Brass, Zinc Alloy, Stainless Steel
- Finishes
- Antique BrassSatin Stainless SteelMatte BlackChromeSatin Brass
Door numerals and letters, finish-matched across a whole tower.
- Material
- Brass, Stainless Steel, Zinc Alloy
- Finishes
- Antique BrassSatin Stainless SteelMatte BlackSatin BrassPolished Brass
Product Questions
Frequently Asked Questions
In most cases yes. Send a physical sample of the finish you need to match. We produce a finish sample for your approval, and the approved sample becomes the production reference for the whole order.
Yes, subject to a feasibility review. Share the drawing or a physical sample and we will confirm what is producible, what needs adjustment, and whether any tooling is required before you commit.
MOQ depends on the product, material, finish and whether the item is standard or customised. It is confirmed with your quotation rather than applied as one blanket figure.
Yes. Samples are an ordinary part of the process, particularly for finish approval. Request samples through the enquiry form or the sample request on any product page.
Request Stile Flush Bolt for your project or programme
Tell us the quantity, finish and delivery schedule. We will confirm the specification, arrange samples for approval and quote against your requirement.